The Horizontal splitting machine allows doubling the production of the block-cutter by splitting in two pieces thick slabs
DownloadThe Horizontal splitting machine allows doubling the production of the block-cutter by splitting in two pieces thick slabs cut on the latter.
Placed on the beginning of the marble line it feeds it continuously increasing production and lowering cost.
The machine is manufactured in 3 models: with 2, 4 or 6 discs.
In the REF 2 x 62, 1 pair of opposed spindles are placed so that every blade can cut half of the width of the material.
The REF 4 x 62, is equipped with two pairs of opposed spindles so that every blade can cut one fourth of the material. This system allows dealing with the cut of hard marbles.
The hardness of the material determines the feed speed of the belt that can be adjusted from 0 to 3m/m'in.
| Number of diamond blades | 6 |
| Diamond blade diameter | 2 x 625 mm + 2 x 650 mm + 2 x 850 m |
| Number of motors | 6 |
| Motor Power | 4 x 25 hp + 2 x 20 hp |
| Belt Conveyor width | 500 mm |
| Maximum Slab Width | 630 mm |
| Maximum Slab thickness | 160 mm |
| Total Machine Power | 150 hp |
| Machine Length | 6700 mm |
| Machine Width | 2200 mm |
| Machine height | 2050 mm |
| Machine Weight | 7960 kg |