Machine Details

General Characteristics:

• The main structure is made of heavy duty steel in order to ensure maximum stability and quality of the machine over time.
• The table's sliding surface is composed of very thick plates which are machined on five sides.
• The bridge is made of a very stiff box type frame and the base of the slide ways is directly machined on the bridge.
• The placement of slide ways is quick and expensive and enables this machine to keep its accuracy indefinitely.
• Metal shoulders replace conventional concrete walls, facilitating installation and transport of the machine.
• The disk is directly mounted on the motor and the machine is suitable for inclined cuts from 0 to 45
• The forward and return movement of the head is powered by a brushless AC motor with inverter.
• The machine is equipped with end stops both forward and reverse as well as up and down.
• The driving system inside gears is case hardened before final grinding.
• The machine is equipped with an insulated electric panel as well as an articulated control pendant which enables the operator to control the most important commands: Back/Forward and Up/Down for the head, and a potentiometer to control the advancing speed for both cutting directions.
• The electric and tubes for tool cooling are supported by nylon cable holding chains.
• All components are mass-produced, safe and of high quality.